• Rookie
Controlador Gupe, micro controlador duplo para FPV 36S

Controlador Gupe, micro controlador duplo para FPV 36S

Rating 
€ 2.67

Quantidade do produto
em estoque

Item portátil : possui tamanho pequeno e peso leve, encaixe, simples para instalação e remoção, não levará muito esforço ou tempo, melhorando sua experiência de uso Fácil de usar : adote o plugue Tipo -C para que você possa usar sem considerar a inserção positiva e negativa, fácil de usar e salvar seu tempo e esforço. Alto desempenho : possui BEC duplo e incorporado em OSD para alto desempenho para o seu uso, forte para trabalho pesado e uso diário, com bom desempenho. Friendia para uso : Este micro controlador pode ser instalado em pouco tempo, sem necessidade de operação complexa, proporcionando uma experiência de instalação satisfatória. Ultra leve : a placa de chip de controle tem um forte desempenho, mantendo o peso ultra leve, não aumentará a carga ou causará desperdício de energia adicional. Especificação : Item Tipo : Control Material : Components Color eletrônico : Black Application : para FPV, aeronave de controle remoto e mais peso -crescimento : aprox.30g/1,1 oz Tamanho do controle : aprox.4 Empresando o espaçamento do buraco : aprox.2 INAPERTURA : Dispositivo de preprocessamento de 4mm/0.2 : STM32 F405 RGT6 GYROSCOPO : MPU6000 B E C : 5 V/3 A; Dispositivo 9 V/2.5 ASTORAGEM : Tensão de 16mbinput : 3-6 Sfirmware : Betaflight_4.0_matekf405uart Porta serial : 5package Lista : 1 x Control2 x Firamento4 x Mat1 x Diagramnote de fiação : 1. O controle tem muitas funções e componentes integrados são muito intensivos. Por favor, não use ferramentas (como alicate ou manga de bobagem) para nozes durante a instalação, o que pode facilmente arranhar o hardware da torre e causar perdas desnecessárias. A maneira correta é apertar a porca com o dedo e a chave de fenda apertar rapidamente o parafuso do fundo. (Lembre -se de não estar muito apertado, para não danificar o PCB) 2. As hélices não devem ser instaladas durante a instalação e depuração do controle, e os testes não devem ser conduzidos dentro de casa, tanto quanto possível, para evitar acidentes.

Dados do produto

Item Type:
Control
Material:
Electronic Components
Color:
Black
Application:
for FPV, Remote Control Aircraft and more
Gross Weight:
Approx.30g/1.1oz
Control Size:
Approx.36x36mm/1.4x1.4in
Mounting Hole Spacing:
Approx.30.5x30.5mm/1.2x1.2in
Aperture:
4mm/0.2in
Processing Device:
STM32F405RGT6
Gyroscope:
MPU6000
B E C:
5V/3A; 9V/2.5A
Storage Device:
16MB
Input Voltage:
3-6s
Firmware:
betaflight_4.1.0_MATEKF405
Uart Serial Port:
5
Package List:
1 x Control:
2 x Wiring:
4 x Rubber Mat:
1 x Wiring Diagram:
Note:
1. control has many integrated functions and components are very intensive. Please do not use tools (such as nipper pliers or sleeve) to nuts during installation, which may easily scratch the tower hardware and cause unnecessary losses. The correct way is to tighten the nut with your finger and the screwdriver quickly tighten the screw from the bottom. (Remember not to be too tight, so as not to damage the PCB):
2. Propellers should not be installed during the installation and debugging of control, and tests should not be conducted indoors as far as possible to avoid accidents. Check the motor steering and propeller orientation again before installing the propeller for test . tip:
please do not fly near people. Our company will not be responsible for any loss caused by aircraft crash.
3. Do not use non original aluminum column or nylon column to avoid damage to the control hardware. The official standard is custom sized nylon column suitable for the tower.:
4. Before powering on the aircraft, please check again whether the installation between the tower connectors is correct (pins or wires must be aligned), check again whether the positive and negative poles of welding are correct, and check whether the motor screws are against the motor stator to avoid short circuit.:
5. Check whether there is any solder thrown out from the electronic original of tower, :

Best Sellers